COMPACT AND POWERFUL CUT-OFF MACHINE WITH 12" CUTTING WHEELThe STIHL TS 410 gas-driven cut-off machine is suitable for professional users in the fields of building construction, civil engineering and road construction. With its powerful STIHL 2-MIX engine, the robust and compact motorised cut-off machine reliably cuts concrete, stone, asphalt, structural steel or pipes up to a cutting depth of 100 mm. The STIHL anti-vibration system supports precise cutting and exact incisions, while built-in buffer elements reduce the engine vibrations transmitted to muscles and joints; this makes your work particularly effortless when using the gas-driven cut-off machine without a cart. The sophisticated ergonomic handle design allows for good cutting comfort, even in different positions. The decompression valve on the engine also reduces the effort required to start it. The STIHL TS 410 cut-off machine is designed for use with 300 mm cutting wheels. The standard water connection continuously feeds water to the cutting blade of the TS 410 motorised cut-off machine, immediately binding the dust generated during cutting work. The long-life air filter system and the compensator extend the cleaning interval for the machine, ensuring you can work uninterrupted for longer. The vast majority of the dust particles sucked into the machine are separated and returned to the ambient air. This increases the overall filter service life. |
STIHL ANTI-VIBRATION SYSTEMFOR MORE PLEASANT WORK. Vibrations can occur when you put your power tools through their paces, and these are particularly noticeable in the grip area. The buffer and spring elements of the STIHL anti-vibration system reduce the transmission of engine vibrations to the handle area and therefore to your body. The result is that your power tool is more comfortable to hold and your work is much less tiring. |
STIHL 2-MIX ENGINEHIGHLY POWER-EFFICIENT. With the STIHL 2-MIX engine, you can reduce exhaust emissions and fuel consumption, and therefore operating costs. This 2-stroke engine is low-maintenance and uses fuel efficiently even at high power levels. Use a mixture of petrol and engine oil as fuel. The STIHL 2-MIX engine complies with the strict EU Stage V emissions directive. |
LONG-LIFE AIR FILTER SYSTEM FOR CUT-OFF MACHINESENSURES A LONG FILTER SERVICE LIFE. The long-life air filter system for cut-off machines does not collect coarse dust particles, but uses cyclone air routing to separate them and then discharges them into the ambient air. With just this first step the system removes around 80% of dust particles in the intake air. This enables an extremely long filter service life, and makes the tool easy to maintain. |
Semi automatic V-belt tensioningEXTENDS THE BELT’S SERVICE LIFE. Semi-automatic STIHL belt tensioning makes it easier for you to re-tension the drive belt. All you need is to adjust the adjustment screw with your spark plug wrench. Consistent tension extends the service life of the belt and bearing. For more detailed information on re-tensioning, please refer to the operating instructions of your power tool.. |
COMPENSATORREDUCED MAINTENANCE. The compensator is a control system in the carburettor, which uses pressure compensation to ensure that engine performance, exhaust gas quality and fuel consumption remain virtually constant over a long period of time, despite increasing contamination of the air filter. You do not need to clean the air filter until there is a noticeable drop in performance. This means that you can work for a long time without maintenance. |
MANUAL DECOMPRESSIONEFFORTLESS START-UP. The decompression valve makes it easier to start your power tool. When starting, you can allow some of the compressed mixture to escape from the cylinder by opening the valve. This protects the start-up system and reduces the amount of force required on the starter cord. |